Category Archives: Software

Leading Software Maniacs announces availability of innovative project management workshops

FULL-DAY WORKSHOP:

A full-day, duo-instructor workshop called Deliver Projects on Time™ With eXtreme Project Management® is now available to be scheduled for public or private classes. Not your typical re-explanation of thePMBOK® Guide or yet another “How to Be Agile” class, we’ve combined two popular full-day workshops, “Deliver Projects On Time, Every Time!” with Doug DeCarlo Group’s “eXtreme Project Management” into an accelerated, one-day workshop.

This is the only workshop that giveas you proven Agile tools to accelerate planning and on-time delivery for any project. One day, 8 PDUs, two instructors, and a “lively” way to learn! PMI member registration fees start at $299 (early bird). For more information, point your browser to http://www.DeliverExtremeProjects.com.

HALF-DAY WORKSHOP:

For folks that can’t spare a full-day workshop we’ve created a new half-day Project Managers Agile Boot Camp. The instructional material has been condensed to give you what you need to understand project agility in just under four hours. You’ll learn how to distinguish the characteristics between the PMBOK® Guide, traditional waterfall, and Agile (Scrum) approaches to project management. The workshop is facilitated by Ken Whitaker, an experienced project manager, software executive, instructor, and author.

The workshop is highly interactive, lively, and impactful. Attendee registration fees for the 3.5-hour of instruction is competitive priced starting at $159.

OTHER SERVICES:

In addition to workshops, Leading Software Maniacs provides consulting services as well as keynotes, eLearning classes, and no cost project management fun-filled videos. Please visit us at Leading Software Maniacs is a PMI Registered Education Provider.

Leading Software Maniacs, Deliver Projects On Time, Decision Pyramid, the Leading Software Maniacs logo, PM University, and PM Chalkboard are marks of Leading Software Maniacs, LLC. eXtreme Project Management brand project management and Project Acceleration Event are marks of The Doug DeCarlo Group, Inc. For PM Chalkboard and PM University: No claim is made to the exclusive right to use “PM” apart from the mark as shown. PMI, PMP, PMBOK, the PMI logo, and the PMI Registered Education Provider logo are marks of the Project Management Institute, Inc. All other marks not mentioned are trademarks or registered trademarks of their respective companies.

Surge Software Announces General Availability of SurgeHub – Full Suite of Mobile Tools for the Entire Sales Lifecycle

Surge Software, Inc. announced today the general availability of their new mobile sales enablement platform, SurgeHub. SurgeHub is a mobile content management (CMS), customer relationship management (CRM), and order entry application that provides a true mobile sales enablement solution to sales teams large and small.

The tablet, mobile, and web-based application allows sales teams to upload, organize, and share sales material, queue up content for upcoming presentations, show PowerPoint presentations in slideshow mode, fill out and digitally sign forms, and track and monitor content usage and sessions with clients. SurgeHub also allows sales teams to easily manage their accounts and contacts, setup customized deal flows, collaborate with other team members, and manage tasks across the organization. In addition, SurgeHub includes a mobile order entry tool, is branded and customized to fit the needs of each unique business, and works both online and offline.

SurgeHub is the first product of its kind to support the entire sales cycle on a mobile device, from giving the initial presentation, to managing content and customers, to taking and tracking orders. SurgeHub is unique in the sense that it allows companies choose to use the full suite of sales enablement features or a subset of features depending on their company needs, giving businesses both large and small the option of tailoring the application to their specific needs.

“There are a number of products in the market that support part of the sales process, such as giving presentations or managing contacts. SurgeHub is the first application to support the entire sales process from giving an initial presentation to taking an order, and everything in-between,” said Matt MacKay, CEO of Surge Software, Inc. “Sales people don’t want to deal with multiple tools from multiple vendors, and the proliferation of mobile apps is just making things worse. We bring sanity to the market for sales teams by giving them an intuitive, easy-to-use sales enablement tool that works the same on any device, including desktops, laptops, tablets, and cell phones.”

“We chose SurgeHub as our mobile sales enablement tool because of the comprehensive feature set and the ease of use,” said Jason Abromaitis, CEO of Simple Serve.” The usage tracking features help us to understand what is going on in the field. SurgeHub is an essential tool for any mobile sales team.”

SurgeHub can be used stand-alone or it can be connected to 3rd party systems. A web version is included for desktop/browser-based access. SurgeHub can be used in a hosted “SaaS / Cloud” model or it can be installed on premise.

MIcrosoft Launches Hardware Certification Requirements for Windows 8.1

Microsoft corporation some time ago has been providing Windows 8.1 Preview can be downloaded for free. And later in August, Microsoft also plans to begin delivering the OS to the notebook and tablet manufacturers.

Now before the second step is done, the Redmond-based company that was recently launched hardware certification requirements for Windows 8.1. The certification was announced by Microsoft at the Worldwide Partner Conference and includes some hardware such as Bluetooth, WiFi, 720p webcam and audio equipment.

The certification also allows for features such as Windows 8.1 Wireless Miracast display, internet sharing, NFC, WiFi Direct print and biometric authentication. However sertfikasi is intended for existing devices in 2014 and 2015. So we’re not going to find it in the near future.

Microsoft Expands Bing Features People Autosuggest

Jakarta-Microsoft has just announced the company will expand the feature browser engine Bing Autosuggest People. This one feature is now not only automatically suggest information that includes humans, but many other things.
Bing Autosuggest People is a feature that can be recommended based on the first few words are typed. This feature then sort a list of words related to selected by the user.
“Bing’s new feature could understand a word that the user types that may have different meanings that can give you many options can be selected according to user interest,” as Microsoft’s statement as reported by The NextWeb, Thursday, July 18, 2013.
Microsoft launched this feature in May 2013 with the aim of helping users find information Bing celebrities, athletes, military, or even a friend whose profile stored on LinkedIn. Now, People Autosuggest new Bing feature automatically suggests brands, movies, albums, place, software, sports, animal species, and much more.
For example, when a user types a word Pitbull, People Autosuggest feature will help recommend the name of the artist singer started to kind of animal. Users simply select the desired search recommendations.
Bill Gates’s company gave the example of two other words, Harry Potter and the Empire State Building. When users type in Bing Harry Potter, will feature gives you the option in terms of literature, the characters, and the title of the movie. While the word ‘Empire State Building’, Bing will not give you much choice but according to a summary from Wikipedia because Microsoft users can only be directed at one place only.
To determine differences in every word that is typed, Microsoft Bing complement with a technology called Satori. This technology to understand the relationship of millions of people, places, and things in terms of the real and digital world.

Folder Access Windows 8 on Linux

Two editions ago we have discussed how to access Ubuntu from Windows 8. The technique does not necessarily mean that you can access the folder dibagipakaikan Windows 8 on Linux. Well, that ye may be able to access the folders of Windows 8, you should try this tutorial.

Step 1:
Configuration Workgroup Computers in the same

How:

T04-435-Windows8-gb11

 

1. Make the same Workgroup. Go to the Start screen, type “System”, click Settings, and then click the System icon on the left side. Click the “Change Settings” on computers using the Windows 8 operating system.

 

T04-435-Windows8-gb12

 

 

2. In the System Properties window go to the Computer Name tab and see the workgroup name there. Comparing with the existing workgroup name information in Linux. If the same, you can jump straight to step 4. If different, follow the first 3 steps.

 

 

T04-435-Windows8-gb12

 

3. Click the “Change” is in the Computer Name tab. After that, in the Computer Name Changes window, click the Workgroup menu in the box if the Member in the column below, the contents of the same name with a Linux workgroup. Press “OK” to save changes. When prompted, restart the PC in order to connect with the new workgroup.

 

 

Step 2:
Configuring Windows PC to be shared
T04-435-Windows8-gb20Bagipakaikan files as usual. Start Windows Explorer, and browse the folder name you want dibagipakaikan. Right-click the folder, select “Share with> Homegroup (view)” to provide read-only access or “Share with> Homegroup (view and edit)” to provide read and write access.

 

Step 3:

Access Folders from Linux
In this example we will use Ubuntu as an example. To access the folder via the Ubuntu dibagipakaikan, there are two ways that can be used. You can access the network via a network connection directly to the browser or Windows PC. This she steps details.

Option A: Access via the Network Browser

T04-435-Windows8-gb31

 

 

1. Click the Places menu> Network on your desktop.

 

 

 

T04-435-Windows8-gb32

 

 

2. When Network File Browser window appears, double-click the Windows Network icon on the list.

 

 

 

T04-435-Windows8-gb33

 

3. List of networks will appear next computer operating system Windows detected by Linux. Double-click the line with the name of the workgroup that you created in step 1.

 

4. Finally, double-click the name of your computer operating system Windows 8. Earlier dibagipakaikan folder will appear and can be accessed as usual.

 

Option B: Direct Connection to Windows

T04-435-Windows8-gb41

 

 

1. From the desktop, click the “Places> Connect to Server”.

 

 

 

T04-435-Windows8-gb42

 

 

2. Will munncul Connect to server window on the screen. You are asked to fill in a few questions about the membagipakaikan file server.

 

 

T04-435-Windows8-gb43

 

 

3. To get the right information, turn to your Windows PC. After that, right-click the folder that dibagipakaikan, click “Properties” and click the “Sharing” tab. Record the name of the folder sharing and its Network Path.

 

 

T04-435-Windows8-gb44

 

4. Now, turning back to Linux. Enter the following information in the Connect to Server window:
• Service type: Windows share;
• Server: WINDOWS-PC (filled with computer name);
• Share: / Users / name / Desktop (the path of the folder in bagipakaikan. Signs backslash (\) is replaced with a slash (/));
• Folder: shared (folder name dibagipakaikan).

 

5. Give a check mark in front of the option “Add Bookmark” and give the Bookmark name to any name that allows you to remember the name of the folder and file locations dibagipakaikan.

T04-435-Windows8-gb45

 

6. Click “Connect”. Window that contains folders dibagipakaikan in Windows 8 will appear automatically. At other times, you’ll be able to access the same folder quickly by simply clicking on the Places menu bookmarking it.

WhatsApp Luncurkan Fitur Baru di Windows Phone

Jakarta – WhatsApp is one of the instant messaging service that can be used by many types of cell phone operating system. Not surprisingly, WhatsApp has 250 million active users. According to the Wall Street Journal website, this amount is equivalent to the number of users on Twitter, Facebook Messenger, and Skype.
What’s more, the instant messaging application also does not include ads in their services. Users were not bothered by ads that sometimes appear like the other instant messaging services.
Now, WhatsApp update the application with new features for Windows Phone users. Some of the new features that include
1. Make voice calls;
2. Background API (Application Programming Interface) which can play music;
3. New Smiley;
4. Notifications are updated to the user;
5. Quick summary (if the application is open and the user clicks the notification, the application will open fast like on Android);
6. The user will be asked whether you want to save the conversation history, users can arrange it through the settings menu, and
7. Images are displayed larger.
Updates on Windows Phone devices can be downloaded in Windows Phone Store.

3-D Gun Printing: Here’s the Software That Stops It

New software has been developed that aims to restrict the manufacture of firearms that have been created using new 3-D technology.

The world’s first gun made using 3-D printing – called “The Liberator” – was successfully fired on May 6 in Austin, Texas. In just three days the blueprint created by startup Defense Distributed to produce the plastic gun had been downloaded around 100,000 times, according to Forbes Magazine.

Anti-gun campaigners have criticized the project, whilst lawmakers in different U.S. states have moved to pass new legislation to prohibit the manufacture, sale and use of the digitally made firearms. And now Danish startup Create It REAL has produced software that it says blocks users from printing guns in the first place.

“The likely buyers are 3-D printer manufacturers who want to minimize their liability risk and offer a firearm parental control feature to their customers,” Create It REAL’s CEO Jeremie Pierre Gay told CNBC.

“The feature creates a unique digital fingerprint of the firearm…the manufacturer could decide to block the print or to simply give a warning to the user of the potential danger.”

The software has taken a year to develop. The firm realized there was a gap in the market after surveying end users and 3D printer manufacturers. Gay told CNBC that his previous job working with Digital Rights Management (DRM) for technology firm Motorola served him well.

“[We realized] people are interested in the ability to put a lock on their firearms at home, the same should be possible on a 3D printer as a parental control feature. I would say that this feature is customer driven even if they did not know they wanted the feature when we asked,” he said.

“The possibility to make a firearm at home is not new, there are many plans on how to do it on Internet, the problem with 3-D printing is that it could become simply too easy, this feature makes it more complicated again.”

Cody Wilson, the man behind nonprofit Defense Distributed was skeptical that the product would actually be able to prohibit the printing of guns, which are produced as separate parts and then assembled. “The Liberator” is printed with hard plastic and fires a standard .380 caliber bullet. The only non-printed piece is a common hardware store nail which is used as its firing pin.

“Such software must walk a very fine line, of which I’ve no doubt it is incapable…It’s interesting PR to the uninitiated only,” the 25-year-old law student at the University of Texas told CNBC.

“‘The Liberator’ pistol is an assembly of over 17 parts, most of which individually would not set off a detection software unless the exact model was blacklisted. Think about it, springs, hammer, even the grip. These are not ‘guns’.”

‘Wild West’ Regulation

Both New York City and New York State have introduced legislation to curb the making of 3-D printed firearms or ban their use altogether and similar bills have been introduced in California. Linda Rosenthal, a New York State assembly member told CNBC that New York’s bill is currently sitting with the Codes Committee after the legislative session ended on June 21.

“I have all intentions of pursuing this legislation next session,” she told CNBC. “The controversy surrounding the passage of the SAFE ACT (the New York Secure Ammunition and Firearms Enforcement Act) will make passing any piece of gun-related legislation that much more difficult, but I think this is a very important issue that must be addressed before the technology becomes widely available.”

New York State should act as a leader to provide a national model for other states to follow, Rosenthal said, and welcomes the new software that she says is effectively the industry regulating its own behavior.

“It is important that industry and government partner with each other to address this issue. Neither acting alone will be able to accomplish enough to deter dangerous behavior….Given that no technology is foolproof, it is critical that the states have strong tools available to discourage wrongdoing and criminalize bad behavior,” she told CNBC.

“3D printing is a very new technology, and in terms of regulation, it is the Wild West out there.”

Despite the issues surrounding the manufacture of firearms, 3-D printing – creating three-dimensional solid objects from digital models – is gathering momentum and is transforming everything from medicine to home goods. Printers that once cost $30,000 now are priced closer to $1,000 and have the potential to rewrite the rules of global manufacturing.

The market for 3-D printing was estimated at about $1.7 billion in 2011 and could hit $6.5 billion by 2019, according to research firm Wohlers Associates.

Software Start-Up SnoopWall Secures Funding from Renowned Angel Investment Group

NASHUA, N.H., July 11, 2013 /PRNewswire/ — Software start-up SnoopWall announced today that the company has secured a round of funding from the Angel Breakfast Club, one of the oldest investment groups in the country. SnoopWall recently developed an antispyware program that blocks remote eavesdropping. The unique patent-pending technology will be available on laptops, smartphones, and tablets.

“We’re pleased to achieve our first major milestone in the company—acquiring the funds and strategic support needed for SnoopWall to launch,” said Gary Miliefsky, President and Founder of SnoopWall. “It’s an honor to be funded by this prestigious and well recognized angel investment group.”

The Angel Breakfast Club was started in 1976 by the late Mort Goulder. Over the past 30 years, the group has invested in more than 100 companies. The average return-on-investment rate is 29%, a near record for the industry.

Allan Cowen, a leading angel investor and advisor to the company said, “SnoopWall represents another investment opportunity that clearly positions a patent-pending technology that addresses today’s media narrative on mobile security and personal privacy protection.  Backing the SnoopWall project early on came with no hesitation given the market need, and perhaps more importantly, knowing the members of the team and those that have advisory roles.”

SnoopWall is offering a free trial version of their program for Android until August 1. Visithttp://www.snoopwall.com/free-version to sign-up for a copy.

About SnoopWall

SnoopWall is the world’s first counterveillance software company focused on helping consumers and enterprises protect their privacy on all of their computing devices including smartphones, tablets, and laptops.

Official feedback on OpenGL 4.4 thread

 SIGGRAPH – Anaheim, CA – The Khronos™ Group today announced the immediate release of the OpenGL® 4.4 specification,bringing the very latest graphics functionality to the most advanced and widely adopted cross-platform 2D and 3D graphics API (application programming interface). OpenGL 4.4 unlocks capabilities of today’s leading-edge graphics hardware while maintaining full backwards compatibility, enabling applications to incrementally use new features while portably accessing state-of-the-art graphics processing units (GPUs) across diverse operating systems and platforms. Also, OpenGL 4.4 defines new functionality to streamline the porting of applications and titles from other platforms and APIs. The full specification and reference materials are available for immediate download at http://www.opengl.org/registry.

In addition to the OpenGL 4.4 specification, the OpenGL ARB (Architecture Review Board) Working Group at Khronos has created the first set of formal OpenGL conformance tests since OpenGL 2.0. Khronos will offer certification of drivers from version 3.3, and full certification is mandatory for OpenGL 4.4 and onwards. This will help reduce differences between multiple vendors’ OpenGL drivers, resulting in enhanced portability for developers.

New functionality in the OpenGL 4.4 specification includes:

Buffer Placement Control (GL_ARB_buffer_storage)
Significantly enhances memory flexibility and efficiency through explicit control over the position of buffers in the graphics and system memory, together with cache behavior control – including the ability of the CPU to map a buffer for direct use by a GPU.

Efficient Asynchronous Queries
(GL_ARB_query_buffer_object)
Buffer objects can be the direct target of a query to avoid the CPU waiting for the result and stalling the graphics pipeline. This provides significantly boosted performance for applications that intend to subsequently use the results of queries on the GPU, such as dynamic quality reduction strategies based on performance metrics.

Shader Variable Layout (GL_ARB_enhanced_layouts)
Detailed control over placement of shader interface variables, including the ability to pack vectors efficiently with scalar types. Includes full control over variable layout inside uniform blocks and enables shaders to specify transform feedback variables and buffer layout.

Efficient Multiple Object Binding (GL_ARB_multi_bind)
New commands which enable an application to bind or unbind sets of objects with one API call instead of separate commands for each bind operation, amortizing the function call, name space lookup, and potential locking overhead. The core rendering loop of many graphics applications frequently bind different sets of textures, samplers, images, vertex buffers, and uniform buffers and so this can significantly reduce CPU overhead and improve performance.

Streamlined Porting of Direct3D applications

A number of core functions contribute to easier porting of applications and games written in Direct3D including GL_ARB_buffer_storage for buffer placement control, GL_ARB_vertex_type_10f_11f_11f_rev which creates a vertex data type that packs three components in a 32 bit value that provides a performance improvement for lower precision vertices and is a format used by Direct3D, and GL_ARB_texture_mirror_clamp_to_edge that provides a texture clamping mode also used by Direct3D.Extensions released alongside the OpenGL 4.4 specification include:

Bindless Texture Extension (GL_ARB_bindless_texture)
Shaders can now access an effectively unlimited number of texture and image resources directly by virtual addresses. This bindless texture approach avoids the application overhead due to explicitly binding a small window of accessible textures. Ray tracing and global illumination algorithms are faster and simpler with unfettered access to a virtual world’s entire texture set.

Sparse Texture Extension (GL_ARB_sparse_texture)
Enables handling of huge textures that are much larger than the GPUs physical memory by allowing an application to select which regions of the texture are resident for ‘mega-texture’ algorithms and very large data-set visualizations.

OpenGL BOF at SIGGRAPH, Anaheim, CA July 24th 2013
There is an OpenGL BOF “Birds of a Feather” Meeting on Wednesday July 24th at 7-8PM at the Hilton Anaheim, California Ballroom A & B, where attendees are invited to meet OpenGL implementers and developers and learn more about the new OpenGL 4.4 specification.

ManageEngine Previews Citrix Xen Virtualization Support in Applications Manager, OpManager

ManageEngine, the real-time IT management company, today will preview the Xen virtualization support in OpManager, its network performance management and data center monitoring software, and in Applications Manager, its application performance monitoring solution. The move lets application developers and IT operations teams in large enterprises monitor Citrix Xen hosts and virtual machines (VMs) for availability, performance and XenMotion activity. Live demonstrations of Xen support in Applications Manager and OpManager are available at http://demo.appmanager.com and http://xendemo.opmanager.com, respectively.

ManageEngine made today’s announcement at the Virtualization Technology Users Group (VTUG) Summer Slam 2013 being held today in Brunswick, Maine. A sponsor of the event, the company will demonstrate the forthcoming Xen features in Applications Manager and OpManager. In addition, ManageEngine’s Rakesh Inbaraj will lead a breakout session, “Application Visibility – A Recipe for Conducting Successful Virtualization Projects,” at 1pm, 2pm and 3pm.

Dev Anand, director of product management at ManageEngine, said, “Though initially adopted only by service providers and hosting providers, Citrix XenServer has emerged as a staple in small and medium enterprises in recent years. OpManager and Applications Manager already support VMware and Hyper-V servers, and adding XenServer monitoring support to the mix was the next logical step in our hypervisor coverage.”

ManageEngine Embraces Xen

ManageEngine provides virtualization management on three fronts. For application developers, Applications Manager delivers a holistic view of app performance, end-user experience and Apdex score along with the underlying XenServer health. Meanwhile, data center or enterprise IT infrastructure managers can monitor their network, server and virtualization components via OpManager. Finally, CIOs and data center managers will find an integrated view of the network, server and storage; application performance; and end-user experience levels by using OpManager and its Application Monitoring plug-in module.

Highlights of the Xen support in Applications Manager and OpManager include:

  • Automatic discovery of XenServer hosts and VMs via Xen API
  • Complete inventory and mapping of hosts, VMs as well as storage repositories and virtual disk images
  • Alerts delivered via email and SMS for Xen-related downtime and performance issues
  • Identifies XenMotion activity and updates inventory to reflect live migration of VMs as they move from host to host
  • Real-time map of Xen topology

Pricing and Availability

Xen server support is available as a beta version in both OpManager and Applications Manager. The beta version of OpManager is available for download at http://www.manageengine.com/network-monitoring/beta-signup.html. The beta version of Applications Manager can be downloaded athttp://www.manageengine.com/applications_manager/beta-signup.html.

OpManager Enterprise Edition prices start at $16,495 for 500 devices. The Application Monitoring plug-in starts at $15,990 for 250 monitors. Applications Manager Professional Edition starts at $795 for up to 25 applications or servers.

For more information on OpManager, please visit http://www.manageengine.com/opmanager, and for Applications Manager, visit http://www.manageengine.com/apm. For more information on ManageEngine, please visit http://www.manageengine.com/; follow the company blog athttp://blogs.manageengine.com, on Facebook at http://www.facebook.com/ManageEngine and on Twitter at @ManageEngine.

About OpManager

ManageEngine OpManager is a network management platform that helps large enterprises, service providers and SMEs manage their data centers and IT infrastructure efficiently and cost effectively. Automated workflows, intelligent alerting engines, configurable discovery rules, and extendable templates enable IT teams to setup a 24×7 monitoring system within hours of installation. Do-it-yourself plug-ins extend the scope of management to include network change and configuration management and IP address management as well as monitoring of networks, applications, databases, virtualization and NetFlow-based bandwidth. For more information on ManageEngine OpManager, please visit http://www.manageengine.com/opmanager.

About Applications Manager

ManageEngine Applications Manager is application performance monitoring software that helps businesses guarantee high availability and performance for their business applications by ensuring servers and applications have high uptime. It comes with out-of-the-box support for 50+ application servers, servers, databases and transactions spanning physical, virtual and cloud infrastructures. For more information on ManageEngine Applications Manager, please visithttp://www.manageengine.com/apm.

About ManageEngine

ManageEngine delivers the real-time IT management tools that empower an IT team to meet an organization’s need for real-time services and support. Worldwide, more than 72,000 established and emerging enterprises — including more than 60 percent of the Fortune 500 — rely on ManageEngine products to ensure the optimal performance of their critical IT infrastructure, including networks, servers, applications, desktops and more. ManageEngine is a division of Zoho Corp. with offices worldwide, including the United States, India, Japan and China. For more information, please visit http://buzz.manageengine.com/; follow the company blog athttp://blogs.manageengine.com/, on Facebook at http://www.facebook.com/ManageEngine and on Twitter at @ManageEngine.

ManageEngine is a trademark of Zoho Corp. All other brand names and product names are trademarks or registered trademarks of their respective companies.

Tags: ManageEngine, real-time IT, Zoho, OpManager, Applications Manager, Citrix XenServer, VTUG, Virtualization Technology Users Group, VMware, Hyper-V, network monitoring, configuration management, end user experience, network monitoring, cloud monitoring, virtualization, cloud, IT management, user experience monitoring